DISASSEMBLY INSTRUCTIONS
1-5: REMOCON PCB / LED PCB / OPERATION PCB
(Refer to Fig. 1-5)
1. Remove the Remocon PCB in the direction of arrow (A).
2. Remove the screw (1).
3. Remove the Angle Hinge in the direction of arrow (B).
4. Unlock the 2 supports (1).
5. Remove the LED PCB in the direction of arrow (C).
6. Remove the Operation PCB in the direction of arrow (D).
(1)
Angle Hing
Remocon PCB
(B)
LED PCB
(A)
Operation PCB
(C)
(2)
(D)
Fig. 1-5