Disassembly Instructions; Removal Of Mechanical Parts And P.c. Boards; Stand Ass'y; Back Cabi Ass'y - JVC LT-22HG45E Service Manual

1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
CAUTION
Be careful not to remove the LVDS cable forcibly, because
the LVDS cable may be damaged.
1-1: STAND ASS'Y (Refer to Fig. 1-1)
1. Remove the 3 screws (1).
2. Remove the Stand Ass'y in the direction of arrow.

Stand Ass'y

1-2: BACK CABI ASS'Y (Refer to Fig. 1-2)
1. Remove the screw (1).
2. Remove the 3 screws (2).
3. Remove the Back Cabi Ass'y in the direction of arrow.
(1)

DISASSEMBLY INSTRUCTIONS

(1)
(1)
(1)
Fig. 1-1
(2)
(2)
(2)
Fig. 1-2
1-3: MAIN PCB (Refer to Fig. 1-3)
1. Disconnect the following connectors:
(CN2, CN3, CN5, CN6, CN11 and CN17).
2. Remove the screw (1).
3. Remove the 2 screws (2).
4. Remove the Plate Jack in the direction of arrow (A).
5. Remove the Shield Jack in the direction of arrow (B).
6. Remove the 4 screws (3).
7. Remove the Main Unit in the direction of arrow (C).
(2)
(1)
Shield Jack
(2)
(A)
(B)
Plate Jack
(3)
CN11
1-4: POWER PCB (Refer to Fig. 1-4)
1. Disconnect the following connector: (CP7001).
2. Remove the 6 screws (1).
3. Remove the Power PCB in the direction of arrow.
CP7001
CN5
CN2
CN17
(3)
(3)
CN6
(3)
Main Unit
(C)
CN3
Fig. 1-3
(1)
(1)
(1)
(1)
(1)
Power PCB
Fig. 1-4