NEC Express5800 Configuration Manual page 19

CONFIGURATION GUIDE
4.1.2 3.5-inch Drive Model
Non-RAID
RAID 0/1/10
RAID 5/6/50/60
NOTE:

Embedded SATA RAID controller is supported only on Windows operating systems. An optional RAID
controller is required to configure RAID array for other operating systems.

Embedded SATA RAID Controller does not support RAID 10 configured with 2TB and 3TB HDDs.

Hot plug insertion/removal is not supported with the Embedded SATA non-RAID controller.

All hard drives within a RAID array should be of the same capacity.

For optional RAID controller driver to install Windows Server 2003 R2, download from the NEC
website at:
http://www.nec.com/en/global/prod/express/download/index.html
NEC Corporation
–
NEC Express5800/R120d-1E
Embedded SATA
RAID Controller
Optional RAID
Controller
Revision 7.0 – October 25, 2013
Refer to
Refer to
Refer to
512 MB Cache Refer to
1 GB Cache/
Refer to
Battery
1 GB Cache/
Refer to
CacheVault
Available Interface
4.3.1
SATA
4.3.2
SATA
4.3.3
SATA
4.3.4
SATA
4.3.5
SATA
4.3.6
SATA
19