Honeywell VisionPRO 8000 Installer Setup And System Test Pocket Manual page 8

Table 1. Installer Setup (Continued).
Installer Installer
Setup Setup
Number Name
0670 Keypad
Lockout
0680 Temperature
Control Heat
0685 Recovery
Heat Ramp
Rate
62-0266
Default
Setting All Settings
0 0—Unlocked
1—Partial Lockout 1
2—Partial Lockout 2
3—Fully Locked
2 1—Less Aggressive
2—Standard
3—More Aggressive
5 0-20° F/hour
(-18- -7° C)
8
Notes
Unlocked: All
functions
accessible.
Partial 1: Locks all
but Holiday,
Override, and Up/
Down.
Partial 2: Locks all
but Holiday and
Override.
Full: Entire
interface locked/
non-functional.
Only shown if
system has heat
stages.
Only integral gains
affected. Affects
control operation in
all control regimes
(not just recovery
or setpoint
change).
More Aggressive
stops signal prior to
reaching the
setpoint. (For use
with oversized
equipment.)
Only shown if
system has heat
stages.
0 disables ramped
recovery (step
setpoint change at
period start time).