Using Your Camera; Addition Of A Lens - Cedip DC004U-A Jade UC User Manual

6. Using your camera

6.1. Addition of a lens

Lenses are fragile elements.
Take the greatest care at the time of their handling,
particularly for lenses.
Lens connectors are fragile elements (Motorized Lens).
Take great care not to touch the connector while handling the
lens.
Lenses can be heavy.
Some lenses weight several hundred grams. Be careful not to
be surprised by its weight.
Turn the ring of the lens bayonet of a quarter of turn clockwise while placing
a hand below. It is not necessary to strongly tighten ring to turn it.
Be careful with motorized lens because it is impossible to turn the ring of the
lens bayonet of a quarter of turn, just a eighth of turn is required.
Place caps on the lens and store it.
Never force on lens.
Check that optics is clean before assembling it in the camera.
See section 8.1 for the maintenance of optics
Remove the caps of the lenses that you wish to use and place it gently in the
bayonet. Place the locating pin of mounting opposite to the corresponding
hole in lens. A white dot indicates the position (except for motorized lenses).
Gently insert the lens and turn the ring counter clockwise.
DC004U-A Jade UC User Manual.doc
JADE UC User Manual
Page 13