Table of Contents
Advertisement
After a few seconds, 10s typically, the Boot Loader disappears and the system
is ready to take infrared images.
5.5. Pointing and focusing
Before taking a measurement, ensure that the object is located at the center of
the image and that focusing is optimized.
To adjust the focus with motorized lens, use the instruction "S0202.D05 -
instruction for motorized lens" provided in the CD-ROM.
5.6. Camera Power Off
The camera is turned off by disconnect the power cable.
Repeated Power on operations may reduce the lifetime
of your equipment.
Wait at least 1 minute between the power off and the power
on of the camera.
5.7. Precaution of use
Do not exceed specified environmental conditions.
Your equipment risks malfunction after being exposed to
extreme environmental conditions.
Handle with great care the lens and all moving parts
Handle
connectors. These parts are particularly fragile.
Connection of cables
The connection and disconnection of the cables can be carried
out at any time, camera on or off, computer on or off.
5.8. Training
This equipment and its use require knowledge of the field of infrared
thermography in order to make best use of the camera and the processing of
acquisitions.
Cedip offers training schemes allowing you to use this equipment to its full
potential. You can contact Cedip in order to establish your training
requirements.
DC004U-A Jade UC User Manual.doc
BootLaoder ScreenShot
gently
any
additional
JADE UC User Manual
lenses,
as
well
as
the
Page 12
Advertisement
Table of Contents
