5. Starting with the camera
This part explains in detail all steps to be followed before using your camera for
the first time.
5.1. Mounting the camera
Ensure you that the camera is posed on a stable surface or correctly screwed
on the tripod.
5.2. Installation of the software on the computer
Software is pre installed on the computer
See software manual for installation instruction
Install frame grabber drivers or USB 2.0 drivers
Install Vircam acquisition drivers
Install Camera Command software CIRRUS
Install Acquisition and Infrared Image Processing software ALTAIR (Option).
5.3. Connecting the camera
Connect numerical USB cable (Jade UC 33X) or LVDS cable and RS232 serial
cable (Jade UC 30X), according to your use, between the camera and the
computer.
Connect possibly the camera to one video monitor in order to control the
image. Use a cable BNC 75 ohms which you will connect to the camera.
5.4. Powering of the camera
The camera is automatically turned on when you connect the power cable.
Connect the power cable on connector with the red reference mark, and then
the system displays the Boot Loader, which gives technical information about
the specific product.
DC004U-A Jade UC User Manual.doc
JADE UC User Manual
Page 11