Husqvarna WH3614A Operator's Manual page 6

d. Reinstall the bottom two bolts on both sides.(A tapered punch may be needed to help align
the holes.)
e. Retighten all four bolts both sides and remove jack.
5. Using the chart(on page 7), find the correct number of spacers to be placed under the caster
swivel.(see fig. 2)
NOTE: To achieve the best quality cut, the blades should be level with the ground or slightly tipped
forward.
REAR DECK ADJUSTMENT REAR DECK ADJUSTMENT REAR DECK ADJUSTMENT REAR DECK ADJUSTMENT REAR DECK ADJUSTMENT
CASTER HEIGHT ADJUSTMENT CASTER HEIGHT ADJUSTMENT CASTER HEIGHT ADJUSTMENT
CASTER HEIGHT ADJUSTMENT CASTER HEIGHT ADJUSTMENT
6