Telephone Features; Registration - Vodavi WIT-300H User Manual

Telephone Features

Telephone Features

Registration

The Nomad IP
TeleniumIP
Nomad IP
successful call processing. The registration is
accomplished in two phases: wireless LAN connection
establishment and MFIM/VoIP card registration.
Wireless LAN Connection
SSID is used as an identifier which means, "you are part
of the 802.11b compliant wireless network". The
Nomad IP
configured within an Access Point (AP). To setup an SSID,
refer to "Network" on page
MFIM/VoIP Card Setup
XTS IP / XTSc-IP
with the IP address of the VoIP card to initially request
registration. To setup the VoIP card IP address, refer to
"System" on page
TeleniumIP
Remote mode on
Remote settings are configured in the same way as a
wired IP phone. Refer to
The Nomad IP
configured. Refer to
configuration.
Nomad IP User Guide
is one of the IP phones recognized by the
and XTS IP /
must be registered with the system for
should have the same SSID as the one
--- The
61.
--- The Nomad IP
TeleniumIP
can be a DHCP client or may be statically
page 59
XTSc-IP systems. Therefore, the
58.
Nomad IP must be programmed
may be used in Local or
systems. Its Local and
"System" on page
for details to set up network
61.
March 2007
17