D. Tools and Supplies Needed
Before beginning the installation be sure the following tools
and building supplies are available:
Reciprocating saw
Pliers
Hammer
Phillips screwdriver
Flat blade screwdriver
Plumb line
Level
1/2-3/4 in. length, #6 or #8 self-drilling screws
Misc. screws and nails
CAUTION
•
Keep replace dry.
•
Mold or rust may cause odors.
8
Framing material
High temp caulking material
Gloves
Framing square
Electric drill and bits
Safety glasses
Tape measure
Heat & Glo • EM-42 • 28324 Rev U • 02/07
E. Inspect Fireplace and Components
WARNING
Fire Risk
Explosion Risk
Inspect fireplace and components for
damage. Damaged parts may impair safe
operation.
•
Do NOT install damaged components.
•
Do NOT install incomplete components.
•
Do NOT install substitute components
Report damaged parts to dealer.
•
Carefully remove the replace and components from the
packaging.
•
The vent system components and doors are shipped in
separate packages.
•
Report to your dealer any parts damaged in shipment.
•
Read all the instructions before starting the installation.
Follow these instructions carefully during the
installation to ensure maximum safety and bene t.