CITROEN C2 2003 Handbook page 54

AUXILIARY EQUIPMENT DRIVE BELT
Engines : HFX - KFV - NFU
Vehicle with air conditioning.
Remove
Slacken:
- Screws (6), (4) and (5).
- Fully detension the belt by acting on the tensioner roller.
- Remove the accessories drive belt.
Refit.
Respect the following sequence:
- Crankshaft pinion.
- Aircon compressor pulley.
- Guide roller.
- Alternator pulley.
- Tensioner roller.
Place tool [2] on the belt.
- Tighten screw (5) to achieve a belt tension of:
120 ± 3 SEEM units.
- Tighten screws (4) and (6).
- Remove tool [2].
- Complete the refitting.
B1BP10VC B1BP10XC
52