Cylinder Head Tightening/Bolts - CITROEN C2 2003 Handbook

Cylinder head tightening (m.daN)
The cylinder head gasket is dry-fitted.
NOTE : Retightening of the cylinder head
after a completed repair is prohibited.
CYLINDER HEAD
Engine : 8HX
8HX
Pre-tightening 2 ± 0.2 m.daN
Tightening 4 ± 0.4 m.daN
Angular tightening 230° ± 5°
(In the order 1 to 10)
NOTE :
- The bolts should have been tho-
roughly cleaned and dried with a
dry metal brush.
- Oil the threads and under the
heads of the bolts. (Use engine
oil or Molykote G Rapid Plus).
- Pass a tap into the holes in the
cylinder block.
B1DP1CLC
44
Cylinder head bolts
X = MAXIMUM reusable length
8HX
X = 149 mm
B1DP1DBC