Husqvarna Rider 16 Operator's Manual page 17

Warm engine:
4. Set the throttle control midway between position
1 and 2.
5. Turn the ignition key to start position.
IMPORTANT INFORMATION
Do not run the starter for more than about
5 seconds at a time. If the engine does not
start, wait about 10 seconds before trying
again.
6. When the engine has started release the ignition
key to neutral position.
Push the throttle control to the required speed.
For cutting 3/4 to full throttle.
WARNING!
Never run the engine indoors, in
enclosed or poorly ventilated
areas. The exhaust fumes contain
toxic carbon monoxide.
16
– English
DRIVING
1
2
STOP START
STOP START
3