Levante LEVFW200 Operation Manual

Levante LEVFW200 Operation Manual

200w frostwatch radiant heater

Advertisement

Quick Links

LEVFW200
200W Frostwatch Radiant Heater
Operation Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LEVFW200 and is the answer not in the manual?

Questions and answers

Summary of Contents for Levante LEVFW200

  • Page 1 LEVFW200 200W Frostwatch Radiant Heater Operation Manual...
  • Page 3: Assembly Instructions

    REMOVE ALL PACKAGING MATERIALS FROM THIS PRODUCT BEFORE USING IT LEVFW200 200W Frostwatch Radiant Heater IMPORTANT: Read these instructions fully before using the heater. Please retain these instructions for future reference. Make sure that the voltage stated above corresponds with the voltage in your home/office. This quality product has been tested and certified to meet all applicable UK electrical and safety standards.
  • Page 4: Electrical Connection

    Fig. 2 340mm 2. Check the wall to ensure there is no wiring, Fig. 3 pipework etc in the area to be drilled. Drill two 8mm holes on the wall at a distance of 90mm on a vertical line, then one more at a distance of 340mm on the left from the centre of the MIN 300mm horizontal line.
  • Page 5: Thermostat Control

    Safety Control (Thermal Cut-Out). CAUTION: This product has overheat protection. Protection is provided by a re-settable overheat switch which, once the cause of the overheating has been removed AND the heater has cooled down, will allow continued use. In the event that the heater suffers overheating, please shut down immediately by disconnecting the power.
  • Page 6 In line with our policy of continuous product recycled development we reserve the right to change Information concerning the product and documentation specifications where the equipment can be without notice. disposed of can be obtained from your local authority. www.levante-products.com...
  • Page 8 LEV0037d...

Table of Contents