Booting Linux; Quick Start Guide - CompuLab MintBox 2 Owner's Manual

Quick start guide

Connecting MintBox 2

Turn off the display and connect it to the MintBox 2 HDMI connector (use the HDMI to DVI
adapter if needed).

Connect the USB keyboard and mouse to USB 2 connectors.

Plug the Ethernet cable into the Ethernet connector.

In MintBox 2 models with WiFi: Mount the WiFi Antennas on the SMA connector by turning it
clockwise repeatedly until the antenna holds firm.

Insert the DC plug into the MintBox 2 DC-in jack. Rotate clockwise 90

Plug the speakers into the line-out jack.

Connect the power supply to the AC cord and plug the cord into AC outlet. The front panel logo
should light up as the MintBox 2 boots.

Booting Linux

Linux loads automatically on power up. Upon boot you will be guided through the Linux Mint first-boot
setup procedure.
6
to secure.
0