S T A R T U P T H E D V R S Y S T E M - Swann SW244-DRC User Manual

4/8CH Triplex DVR Combo
Misc.
S t a r t u p t h e D V R
S t a r t u p t h e D V
After the unit is properly installed, the DVR unit is ready to record and play. Then apply power by turn on the
power switch.
After the unit is powered on, the unit will check HDD for several seconds, and then the unit will enter into
real-time display mode shown as the following screen:
Digital Video Recorder
S y s t e m
R S y s t e m
Press MENU button on the front panel to display
OSD and select Language.
You can control OSD menu language under this
setting.
VOL +/ - : Pointer up/down and
adjustment control.
MENU: Confirm selection (Enter)
BRI+ : Exit OSD
Press MENU button on the front panel to display OSD
and select Misc. selection.
Signal Source: switching between AV,VGA,DVR source
display.
Reset: System display auto tuning.
VOL +/ - : Pointer up/down and
adjustment control.
MENU: Confirm selection (Enter)
BRI+ : Exit OSD
21