Table of Contents
Advertisement
4/8CH Triplex DVR Combo
♦
Hardware Setup: To update the firmware and to setup the input/output device configuration such as
disk drive, network, display and audio
♦
Exit Main Menu: To exit the main menu
3. Channel Setup
Press
to enter the "Channel setup" as following.
(4CH DVR)
3.1. Channel Number
To select or specify the channel for displaying/recording.
"
" (default) (Full screen mode): you can view / record all channels on the screen of full-screen.
"1,2,3,4": you can view / record each channel be selected on the screen.
3.2. Active Channel
To set the channel been selected at "Channel Number" to both display on screen and record or not.
"ON" – Display on screen, Channel Number color turns to red
"OFF"- No display on screen. Channel Number color turns to white
It can be setup each channel separately by choosing the dedicated channel at "Channel Number".
Or to choose "
3.3. Record Channel
To set the channel been selected at "Channel Number" to be recorded or not.
"ON" – recording, "OFF"- No recording.
Digital Video Recorder
/
" for all channels
26
Advertisement
Table of Contents
