Digital Or Analog Tv Channels; Direct Tuning To A Channel - RCA SCENIUM User Manual

Hdtv with dlp technology high-definition television
Hide thumbs Also See for SCENIUM:
Table of Contents

Advertisement

Digital or Analog TV Channels

A single off-air antenna can pick up both analog and digital channels. Digital channels can be
made up of primary channels and subchannels.
Note: Subchannels (sometimes called minor channels) are channels associated with the
Primary channel (sometimes called the major channel). A primary channel may have just
one subchannel or multiple subchannels.
60 - 2
60
Ch 88 -888 WLPJ
Listening to English in SRS
ON-OFF
learning
TV
DVD
VCR
SAT
AUX
AUDIO
/
CAB
PIP
SWAP
CH. CTRL
FREEZE
CC
PRESETS
FAV
LIGHT
CC
CC
FORMAT
INFO
i
CLEAR
C C
SOUND
Tip
If a digital and analog channel have the same primary
channel number, tune to the analog channel by
entering the analog channel number or entering the
analog channel number and then a subchannel of "0."
Chapter 3
Downloaded from
www.Manualslib.com
Primary
Channel
MPAA - Not Rated
TV button
MENU
M M
Right arrow
SKIP
manuals search engine
Using the TV's Features
Tip:
Use the channel banner to determine
whether a channel is digital or analog.
A digital (ATSC or QAM) channel has a
dash and second number after it (e.g.,
Subchannel
21-1); an analog channel (NTSC) doesn't
(if necessary)
(e.g., Ch 21).

Direct Tuning to a Channel

1. Make sure the remote is in TV mode by pressing TV on the remote
control.
2. Enter the primary channel number. This number appears in the
primary channel entry box. Press OK or wait a few seconds. If you
don't enter a subchannel, the TV tunes to the lowest digital
subchannel.
3. If the primary channel number has fewer than six digits (for cable), or
two digits (for antenna) and you want to enter subchannel numbers,
press the right arrow button to advance to the subchannel entry box.
4. Enter the number of the subchannel. This number appears in the
subchannel entry box.
5. Press OK to tune to the channel or wait a few seconds and the TV
tunes to the channel.
Notes: You can always use the channel up and down buttons on
the remote control to change channels within the TV mode.
If you wait too long before entering the subchannel, the TV tunes
to the lowest digital subchannel.
Cable Input
4:3 Normal 480i SD
35

Advertisement

Table of Contents
loading

Table of Contents