Sound Logic; Audio Mode; Sap (Second Audio Program); Balance - RCA SCENIUM User Manual

Using the TV's Menu System
Main Menu
0
Go Back
Off
1 Equalizer Presets
On
2
Audio Processor
Turning Sound Logic on will monitor a program's audio
3

Sound Logic

Sound Logic track and limit volume excursions to a minimum and
maximum volume range from the current volume setting.
4

Audio Mode

Acting like a dynamic range limiter, it compresses the
dynamic range to limit sudden volume increases (for
5
SAP
example, the sudden increase in volume you sometimes hear
when a commercial starts).
6

Balance

7
Audio Connections
A change in this screen is applied to all inputs.
Press 5 or 6 to point to an option, then press OK to
select it. Press 3to return to the menu.
Main Menu
0 Default Audio Mode
Go Back
English
1
Equalizer Presets
Spanish
2
Audio Processor
French
3
Sound Logic
German
4
Audio Mode Audio Language
Italian
5
SAP
Japanese
6
Balance Korean
Chinese
7
Audio Connections
A change in this screen is applied to all inputs.
Press OK to change the Currently Playing Audio Mode
(if more than one is available).
Main Menu
0
Go Back
Off
1
Equalizer Presets
On
2 Audio Processor
SAP stands for "Second Audio Program". When SAP is
available for a program, the SAP icon in the channel banner
3
Sound Logic
will light up. SAP content can be another language,
descriptions for the visually impaired, or audio not related
4
Audio Mode
to the program (for example, music or news).
5
SAP SAP
If you set "SAP On" and SAP is available for a program, you
6
Balance will hear SAP for any channel where it is available. SAP is
only available for analog (NTSC) programs.
7
Audio Connections
A change in this screen is applied to all inputs.
Press 5 or 6 to point to an option, then press OK to
select it. Press 3to return to the menu.
Main Menu
0
Go Back
Set the balance using the left and right arrows on the
remote control.
1
Equalizer Presets
2
Audio Processor
3
Sound Logic
4
Audio Mode
5
SAP
6
Balance Balance
7
Audio Connections
A change in this screen is applied to all inputs.
Balance allows you to adjust speaker balance output. Use
the 3and 4 keys to adjust the speaker balance left or right.
54
Downloaded from www.Manualslib.com
Sound Logic
Audio
Acting like a dynamic range limiter; it compresses the dynamic range to limit
suggested volume increases (for example, the sudden increase in volume you
sometimes hear when a commercial starts). Choose On or Off, depending on
your preference.
Audio Mode
Audio
Currently Playing
Audio Mode (1 of 1)
The Audio Mode menu lets you choose the default audio mode you want to
Spanish
Change Audio
hear for ATSC (digital TV) programs. If the Audio Mode icon (
The number of Audio Modes available
for the current program is 1.
lights, it means there is more than one audio mode available. The system
If the Default Audio Mode is available, then it
will be heard; otherwise, the mode listed
above is heard. Use the button above
to change the current program's audio.
automatically sets the audio program to the default audio mode from the menu
Audio Mode is only available for
digital-TV (ATSC) programs.
when the channel you are viewing is a digital channel and the specified
language is available for that program.
In the Audio Mode menu, highlight the default audio mode you usually want to
hear by pressing the up and down arrow buttons on your remote control. Press
OK to hear that language by default whenever available on a channel.
Some programs can have audio mode available that can be heard but that
cannot be set as the default. To select and hear those audio modes, navigate to
the "Change Audio" action button and select OK, or use the SOUND button on
the remote.

SAP (Second Audio Program)

Audio
When turned on and available, Second Audio Program plays the analog
program's audio in a second language. SAP is also used to broadcast a
program's audio with descriptions of the video for the visually impaired. SAP
might also contain audio which is totally unrelated to the video.
Balance
Audio
The Balance setting applies to the internal speakers and the headphone output.
Balance is how much audio (loudness) gets sent to the left and right speakers.
manuals search engine
Note: You can change the Audio Mode temporarily by pressing the SOUND
button on the remote control. Changing channels reverts the Audio Mode
back to the default Audio Mode originally selected in the menu.
Notes: SAP is broadcast in mono and is only available for analog
programs, not digital programs.
You can activate SAP (if available) temporarily with the SOUND button.
Changing channels or inputs reverts SAP back to the SAP menu setting.
Note: Balance applies if the Fixed/Variable Audio Output is set to
Variable Output, Speakers On. See the following page for more
information.
) in the banner
Chapter 4