Digital Or Analog Tv Channels - RCA Scenium HD56W151 User Manual

Rca high-definition television user's guide
Hide thumbs Also See for Scenium HD56W151:
Table of Contents

Advertisement

Digital or Analog TV Channels

A single off-air antenna can pick up both analog and digital channels. Digital channels can be
made up of primary channels and subchannels.
Note: Subchannels (sometimes called minor channels) are channels associated with the
Primary channel (sometimes called the major channel). A primary channel may have just
one subchannel or multiple subchannels.
60
60 - 2
Ch 88 -888 WWWW
Listening to: English in SRS FOCUS
ON-OFF
TV
DVD
VCR
SAT CAB
AUX
AUDIO
PIP
SWAP
CH. CTRL SKIP
SOUND
FREEZE
VCR PLUS+
LIGHT
VCR+
FORMAT
INFO
CLEAR
MENU
GUIDE
Tip
If a digital and analog channel have the same primary
channel number, tune to the analog channel by
entering the analog channel number or entering the
analog channel number and then a subchannel of "0."
Chapter 3
Primary
Channel
MPAA - Not Rated
1. Make sure the TV is in TV mode by pressing TV on the remote
TV Button
2. Enter the primary channel number (up to three digits). This number
3. If the primary channel number has fewer than three digits and you
4. Enter the number of the subchannel. This number appears in the
Right Arrow
5. Press OK to tune to the channel or wait a few seconds.
Using the TV's Features
Tip:
Use the channel banner to determine
whether a channel is digital or analog.
A digital (ATSC) channel has a dash and
second number after it (e.g., 21-1); an
Subchannel
analog channel doesn't (e.g., Ch 21).
(if necessary)
4:3 Normal 480i SD
control.
appears in the primary channel entry box. Press OK or wait a few
seconds. If you don't enter a subchannel, the TV tunes to the lowest
subchannel.
want to enter subchannel numbers, press the right arrow button to
advance to the subchannel entry box.
subchannel entry box.
Notes:
You can always use the channel up and down buttons on the
remote control to change channels within the TV mode.
You may notice the size of the channel banner changes when you
change channels. This is perfectly normal and occurs because
analog (NTSC) broadcasts and digital (ATSC) broadcasts use
different formats. Your HDTV can display both types and adjusts
the picture accordingly.
If you wait too long before entering the subchannel, the TV tunes
to the lowest subchannel.
Antenna A (Air)
43

Advertisement

Table of Contents
loading

Table of Contents