Removing The Stand - Sharp Aquos LC-80LE940X Operation Manual

Appendix

Removing the stand

For wall mounting with the optional bracket (AN-52AG4
or AN-80AG1) remove the stand.
Before setting TV on the wall
• Remove the connected cables (DVD, VCR, etc) from the
terminals.
• Before performing work, make sure to turn off the TV.
• Before performing work spread cushioning over the base area
to lay the TV on. This will prevent it from being damaged.
NOTE
• To attach the stand, perform the above steps in reverse order.
• As the TV is very heavy, be careful when moving it.
LC-52LE840X/LC-46LE840X
1
Loosen the screw used to secure the stand cover
and remove the cover.
2
Remove the stand.
1 Unfasten the screws used to secure the stand
in place.
2 Detach the stand from the TV (hold the stand
so it will not drop from the edge of the base
area).
LC-60LE940X
1
Loosen the two screws used to secure the stand
cover.
2
Remove the stand.
1 Unfasten the four screws used to secure the
stand in place.
2 Remove the cover.
LC-80LE940X
1
Unfasten the four screws used to secure the stand
in place.
2
Detach the stand from the TV.
83