Operation Of Touch Control Panel; Control Panel Display; Touch Control Panel Layout - Sharp R-142D Operation Manual

OPERATION OF TOUCH CONTROL PANEL

The operation of the oven is controlled by pressing the appropriate pads arranged on the surface of the
control panel.
An entry signal tone should be heard each time you press the control panel to make a correct entry.
In addition an audible signal will sound for approximately 2 seconds at the end of the cooking cycle, or
4 times when cooking procedure is required.

Control Panel Display

Touch Control Panel Layout

1
1 INSTANT COOK/START PAD
•Press to start oven after
setting programmes.
•Press once to cook for 1
minute at 100% (HIGH POW-
ER) or increase by 1 minute
multiples each time this pad
is pressed during cooking.
2 STOP/CLEAR PAD
•Press to clear during
programming.
•Press once to stop opera-
tion of oven during cook-
ing; press twice to cancel
cooking programme.
NOTE: Open the door to programme the oven.
INSTANT COOK/START pad can be used only when the door is closed.
COOK DEF
2
3 SLOW COOK PAD
Press to cook slowly and
longer time.
4 DEFROST PAD
Press to defrost meat by
entering the defrosting
time.
5 CLOCK PAD
Press to set clock or child
lock.
6 QUANTITY PAD
Press to enter the quantity
for AUTO COOK menus.
QTY CHECK
KG
3
SLOW COOK
2
STOP/CLEAR AUTO COOK
8
E – 4
Indicator Indicator
4
DEFROST
QUANTITY CLOCK
7 TIME PADS
Press to enter cooking/
defrosting time or clock
time.
8 AUTO COOK PAD
Press to select the AUTO
COOK menu.
5
6
7