Advertisement
Front Panel
TAP TEMPO/TUNER ACTIVATION BUTTON
6
Tapping this button will set the delay time. The Nano Vypyr remembers the delay time for the next power up.
Holding this button down for 2 seconds will change the amplifier to Tuner Mode. In Tuner Mode, the amplifier
is muted and the chromatic tuner is activated. Press again to exit tuner.
TUNER DISPLAY
7
Displays which note on the guitar is being tuned. A period in the lower right hand side of the display
indicates a flat note, such as Gb. Do not confuse this with the flat/sharp indicator LED's above the display
which indicate whether the displayed note is flat or sharp. When the green LED just above the Tuner Display
is lit, the displayed note is perfectly in tune. A "-" on the display means the signal is too weak to track, so the
string needs to be re-plucked.
DELAY LEVEL CONTROL
8
Controls the level of the Delay effect. The Delay effect can be present in addition to the other effects. To turn
the delay off, simply turn the knob all the way counter-clockwise.
LOW EQ
9
Controls the amount of low EQ present in the signal.
REVERB LEVEL CONTROL
10
Controls the level of the Reverb effect. The Reverb effect can be present in addition to the other effects. To
turn the reverb off, simply turn the knob all the way counter-clockwise.
MID EQ CONTROL
11
Controls the amount of mid EQ present in the signal
MASTER VOLUME CONTROL
12
Controls the overall volume of the amplifier. If a microphone or auxiliary device is being used, this control will
also control the overall loudness of those devices.
13
HIGH EQ CONTROL
Controls the amount of high EQ present in the signal.
DEAD BATTERY WARNING: When the battery has been depleted, the display will flash "db". The Nano Vypyr
will not function. Replace the battery with fresh D-cells.
CAUTION:
Take great care of the polarity of the batteries to insure they are not installed backwards.
Do not mix used and new batteries.
Do not mix battery type.
Do not expose device to water.
Remove batteries when device is not used for long periods of time to avoid damage caused by battery leakage.
Advertisement
