Hour Meter; Hour Meter; Tracking Knob; Parking Brake - Husqvarna LZ5227TXPKOA, LZ6123LTKOA, LZ6127TKOA, LZ6130TXPKOA, LZ7230TXPKOA Operator's Manual

CONTROLS

2. Hour Meter

The hour meter displays the total operating
time.
It will flash CHG OIL (Change Oil) at 50 hour
intervals. The flash duration is one hour
before and one hour after the interval. The
CHG OIL icon will come on and shut off
automatically. The hour meter can not be
manually reset.

hour meter

Hour meter

3. Tracking knob

The tracking knob is located in front of the left
control lever. Rotating this knob allows fine
tuning adjustments so that the machine
tracks straight with the drive levers in the full
forward position.
Rotate the knob clockwise (as viewed from
the operating position) to increase the speed
or counter clockwise to decrease the speed
on the left control lever. Example: If control
levers are full forward and the unit turns to the
right, turn the tracking knob counter
clockwise to decrease the speed on the left
8011-442
control lever.

Tracking knob

4. Parking Brake

The parking brake is found on the left of the
machine. Pull the lever backward to activate
the brake and forward to release it.
8011-511-1
Parking brake not activated
18
English-