Configuring Your System To "Beep" During Motion; Configuring Alarm Notifications - Lorex LH030 ECO BLACKBOX3 SERIES Instruction Manual

17 Using the PC/Mac Client Software
4. Click Save to apply your settings.

17.20 Configuring your System to "Beep" During Motion

You can set your system to "beep" during motion. This is useful to notify you if someone
enters or exits an area.
To configure the system to "beep" during motion:
1. Click the Remote Setting tab, and click Alarm>Motion.
2. In the Channel drop-down menu, select the channel you wish to configure.
3. Select the Enable checkbox.
4. Beside the Buzzer drop-down menu, select the "beep" duration or select OFF to dis-
able the "beep."
5. In the video window, select the area you wish to monitor for motion.
6. Click Save to apply your settings.
Result: The system beeps when it detects motion, and a green "M" icon appears. The
green "M" icon indicates that the system is only detecting motion, but not recording. To
have the system record motion events, enable motion recording in the recording calendar
(Remote Setting tab>Record>Schedule).

17.21 Configuring Alarm Notifications

Configure the settings for alarm devices (not included).
Note
External alarm devices (such as glass break detectors; not included) are required to configure settings in
the Alarm menu. Some models do not support alarm devices. Check the specifications for your DVR to
determine if it supports alarm devices.
To configure alarm notifications:
1. Click the Remote Setting tab, and click Alarm>Alarm.
#LX400008; r. 2.0/12067/12067; en-US
88