Samsung SMT-W5120 User Manual page 49

Standard DHCP Mode
This option registers a phone to the system using a dynamic IP address assigned by a server that uses a
DHCP standard protocol. You can use this feature if a separate DHCP server is used.
You can use this feature if a separate DHCP server is used or if you attempt to access FON AP.
When you move to another site (area shift), you can still use your phone without registering it again.
1
If you want to access FON AP, select [On]; if not, select [Off],
and then press [OK].
If [On] has been selected at Step 1 (FON AP access)
1
Enter an ID for authentication when accessing FON AP.
2
Enter a password for authentication when accessing FON AP.
3
Enter the System IP address.
48
Table of Contents