System; Registration - Samsung SMT-W5120 User Manual

System

Press the [Menu] button in idle mode, and then select the [8. System] icon.

Registration

This function enables to register a phone to the wireless LAN system (main system).
The phone is available only after registered to the system.
[MENU] 8. System
(Select the system) [OK]
To set the phone's operation mode, select from SIP mode and
Non SIP mode.
Contact the system administrator to check which mode the system
supports, and then select either SIP mode or Non SIP mode.
If you want to access FON AP, select Non SIP Mode. SIP Mode allows the
handset to be used in the office environment. Non SIP Mode allows the
handset to be used in the office and remote location.
System DHCP Mode
This function enables to register a phone to the system using a dynamic IP address.
- User ID: Enter a user ID for a phone registered in the system.
- Password: Enter a user password for a phone registered in the system.
1
Select SSID input mode, and press the [OK] button.
- Auto: An automatic search finds available SSIDs, and the user
can select an SSID from the results.
- Manual: enter an SSID manually.
2
If you select [Auto] at Step 1, SSIDs are automatically searched.
Select an SSID from the list of searched SSIDs.
- Ask the system administrator which SSID should be selected.
[OK] 1. Registration
44
Table of Contents