Page 1
B AT T E R Y C H AR G E R BATTERY CHARGER Installation and User Manual...
Page 2
No other use is allowed without a written authorization supplied by ZIVAN S.r.l. ZIVAN S.r.l. will be not responsible for inaccuracies contained in this manual due to print or translation errors. ZIVAN S.r.l. has the right to make changes or improvements, also for the user interest, without prejudicing the essential characteristic of operation and safety.
Battery charger BC1 Installation and safety instructions Battery charger BC1 has been designed to provide safety and reliable. It is necessary to observe the following precautions in order to avoid damage to persons and to the battery charger: • Read the installation instructions contained in this Manual carefully. For further information put the Manual in a proper place.
Battery charger BC1 LED Indicator RED LED shows that the battery is in initial charging phase. YELLOW LED shows that the battery charger has reached 80% of charge. GREEN LED shows that the battery has reached 100% of charge. Further information can be found in the description of the Charging Curve.
Battery charger BC1 Mechanical dimensions N.B. All dimensions are expressed in mm. Drilling details 12,5 Advised Installation N.B. All dimensions are expressed in mm. 12,5 D01001-02...
Battery charger BC1 TECHNICAL FEATURES Ta=25°C unless otherwise specified. Mains side Value and/or Description Symbol Test Condition Unit Range Supply Voltage 230 ± 10% Veff Frequency 50 ÷ 60 P = P Aeff Absorbed Maximum Current P = P Power Factor cosϕ...
Battery charger BC1 Protection and Safety Value and/or Description Symbol Test Condition Unit Range Insulation Mains to Battery side 1250 Insulation Mains side to Earth Insulation Battery side to Earth Leakage current Supplied equipment < 3 Input fuse Inside the equipment...
Page 8
Battery charger BC1 Options with connectors 6 poles Common contact net presence Normally closed contact for mains presence Normally opened contact for mains presence Red LED anode Common cathode LED Green LED anode Technical features : exchange contacts 0,3A 125VAC...
Page 9
Battery charger BC1 Options with connectors 4 poles and 2 poles Connector 4 poles Red LED anode Not used Common cathode LED Green LED anode Connector 2 poles Common contact net presence Normally closed contact for mains presence Technical features:...
Battery charger BC1 Design, production and sale: ZIVAN SRL Via della Costituzione, 36 42028 Poviglio (RE) ITALIA Tel. +39 0522 960593 Fax +39 0522 967417 info@zivan.it SALES OFFICES ITALY FRANCE SWITZERLAND ZAPI SPA URMA SARL ASMO ENGINEERING AG Via Parma, 59 30, Rue de Morvan Silic 503 Glashütte, 58...