Table of Contents
Advertisement
User manual Version 1.0
Modbus Gateway
Click on upper left "Refresh" to refresh the contents, click "Close" to close this log window.
This example uses the Port1 and the communication log will be listed for Port01, the leading data is the time
, followed with
Write
or Read
where the number in brackets is the number of
Bytes. The data contents to read or write
is represented in Hex, and finally the
text string in brackets is the source of the data stream
(indicating that this entry is written to Port1 and the data source is 192.168.100.31, connection ID is 12) or
the direction of the data stream
(indicating that this entry is read
from Port1 and sent to 192.168.100.31, connection ID is 12).
The same data will appear as corresponding information in the Ethernet section. Due to the fact that the
serial port and Ethernet may use different data modes, the information contained within the Ethernet section
is the result of the data conversion.
Advertisement
Table of Contents
