PRODUCT INFORMATION EXPLODED VIEW FERM PILLAR DRILLING MACHINE FTB-16/500 USERS MANUAL Voltage | 230 V Frequency | 50 Hz Power input | 500 W No load speeds Chuck capacity | 16 mm Chuck shank | B-16 Weight - gross | 23.5 kg...
Page 3
Guard against electric shock 311055 EYESHIELD This unit contains dangerous voltages. Use a RCD (resi- Ferm products are manufactured to high quality stan- dual current device) to provide protection against elec- 309387 CHUCK KEY dards they are safe and fit for purpose at time of sale, but trical shock.
Page 4
• Tap the chuck gently onto the spindle with a soft face hammer. Ferm Ferm...
Page 5
Move the motor plate (17) backwards /forwards to sary. adjust the V-belts tension. The correct tension is +/- 1 cm in middle of belt as illustrated below, do not over tighten the belt. • After adjustment close the pulley cover securely. 1 cm Ferm Ferm...
Page 6
Fix firmly to the correct terminals. Secure the mains • Press the drill head downwards with gentle pressure. Take the drill to your Ferm dealer. Quality department cable in the plug cord grip firmly Let the drill do the work.
Need help?
Do you have a question about the FTB-16/500 and is the answer not in the manual?
Questions and answers