Advertisement
UK
Subject to change
Document Ref:
FTB-13/19847/PMR24/Issue 1/April 02
Copyright ©
These instructions are the sole property of Ferm-Omega Tools and may not be reproduced
Ferm BV • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com
Ferm Table Drilling Machine
FTB-13
0210/25
USER'S MANUAL
Art.nr. 733500
Screwfix Art.nr. 19847
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ferm FTB-13
Summary of Contents for Ferm FTB-13
- Page 1 Subject to change USER’S MANUAL Document Ref: FTB-13/19847/PMR24/Issue 1/April 02 Copyright © These instructions are the sole property of Ferm-Omega Tools and may not be reproduced Ferm Table Drilling Machine FTB-13 Art.nr. 733500 Screwfix Art.nr. 19847 Ferm BV • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com...
-
Page 2: Safety Instructions
Keep this manual with the machine. Number of speeds Chuck capacity/Morse Conical | 13mm/ B-16 Ferm products are manufactured to high quality stan- Weight | 20 kg dards they are safe and fit for purpose at time of sale, but Lpa (sound pressure level) | 62.1 dB(A) -
Page 3: Operational Safety
SPARE PARTS LIST FTB-13 OPERATIONAL SAFETY Avoid unintentional starting Concentrate Do not carry plugged in tools with your finger on the Do not allow routine, which occurs when using the switch. Check that the switch is off before plugging in to... - Page 4 Check the V-belt tension (see section below) - start the drill and run idle for 15 minutes to distribute the factory-applied grease through out the bearings. This is done only when using the drill for the first time. Ferm Ferm...
-
Page 5: Setting The Depth Stop
SECURING THE WORKPIECE • Always use clamps or a drill vice to secure the work- piece. • The slots in the drill table are for attaching the clamps or a drill vice Never hold the workpiece with your hand. Ferm Ferm... -
Page 6: Operating The Drill
Secure the mains cable in the plug cord grip firmly vice to secure the workpiece against the table. Take the drill to your Ferm dealer. Quality department Fit a 5-amp fuse. If a 13 amp (BS1363) plug is used a 5 amp •...
Need help?
Do you have a question about the FTB-13 and is the answer not in the manual?
Questions and answers