Videotel 4022 Operation Manual

Industrial dvd player

Advertisement

Packing List

With your order you should receive...
1 - 6' Power Cord
(1)
1 - Power Supply
(2)
1 - 3' RCA Video/Audio Cable
1 - Remote
(1 remote is included
(4)
with every 4 players purchased)
1 - DVD Player
(5)

Basic Operation Of Player

The 4022 comes shipped to you set up for "Auto Start",
"Auto Play" and "Auto Repeat". This means once you have
connected the player to a TV and power, all you have to do is
open the tray
(by pressing the Open/Close button
(16)
load a disc and close the tray (by pressing the Open/Close
button or by manually pushing the tray in). Within about
15 seconds the movie should begin to play and the player
will be automatically set to auto repeat. When the DVD is in
"Auto" mode the light on the front

Basic Operation Of Player - Remote

Since the "Auto" option was designed to be as simple as possible we have re-
moved functionality from a majority of the buttons on the remote control.
plan to only use this unit to play movies over and over, you will probably
never need the remote.
active. Since some of our customers use 10 to 100 players in the same room we
designed the remote to have single function buttons. For example, the Power but-
ton
ONLY turns the power off. This eliminates the issue of wanting to turn off
(19)
100 players and pressing the button once turns off, say 60, and pressing it again
turns off another 20, but turns 30 of the "off" players back on. You can press the
power button as many times as you like and it will only turn power off. The Play/
Pause button
ONLY turns players back on. Please note, when you turn players
(20)
on they will automatically begin playing from the beginning of the movie unless
you activate the "Resume On" feature (see instructions under "Manual Mode").
The Open/Close button
closes the disc tray.
Basic Operation Of Player - Power Off & Notes
If you wish to turn the power off to the player you can press the Power button
on the remote or on the front of the player. When the power to the player is off,
the light on the front will turn red. The player is powered down and only the light
remains on (uses almost no electricity). If you see the light turn orange, you have
put the player into "Manual Mode". You can toggle between "Auto" and "Manual
Mode" by holding the Power button on the player for about 5 seconds.
Model 4022 Industrial DVD Player Operation Manual
(1)
(3)
will be green.
(18)
However there are a few useful functions that are still
ONLY opens the disc tray. The "SEL" button
(21)
(2)
(3)
),
(17)
(22)
(4)
(5)
(16)
(17)
(18)
(19)
If you
ONLY
(21)
(22)
(20)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 4022 and is the answer not in the manual?

Questions and answers

Summary of Contents for Videotel 4022

  • Page 1: Packing List

    1 - DVD Player Basic Operation Of Player The 4022 comes shipped to you set up for “Auto Start”, “Auto Play” and “Auto Repeat”. This means once you have connected the player to a TV and power, all you have to do is...
  • Page 2 Switching your player to not auto repeat (38) The 4022 has the option to disable the “Auto Repeat” feature (when a disc is at its end, it will start over and automatically loop). To toggle between these 2 settings you need to first remove the DVD. Close the tray and make sure the light on the front is orange, if its green, press and hold the power button on the player for 5 seconds.
  • Page 3 If Videotel determines the player is defective, we will ship you a replacement unit and retrieve the bad player at our cost. If the DVD player is found to be defective within 9 months of invoice date and Videotel was contacted and all troubleshooting options have been exhausted the Customer will be responsible for shipping the bad unit to us for repair.

Table of Contents