Videotel V2200 Owner's Manual

d

Packing List

With your order you should receive...
1 - 6' RCA Video/Audio Cable
(2)
1 - Power Supply
1 - Remote (3)
1 - DVD Player (4)

Basic Operation Of Player

The V2200 comes shipped to you set in mode 1
auto play and auto repeat). This means once you have con-
nected the player to a TV and power, all you have to do is load
your DVD in the drive slot (7). Within about 14 seconds the
movie should begin to play and the player will be automati-
cally set to auto repeat. The player has 3 operational modes
(mode 4 & 5 are not active). You can switch between modes by
pressing the "Mode" button on the player
(14/15/16). When a new mode is selected the DVD player will
power off then back on (there is a 4 second delay when using
the buttons on the player (instant when using the remote).
• Mode 1 - Auto plays / repeats the largest title of the DVD
• Mode 2 - Auto plays / repeats all titles in order
• Mode 3 - Standard, manual dvd operation

Basic Operation Of Player - Remote

Since you purchased this player as a simple reliable auto play, auto repeat de-
vice, the remote is rarely needed. However there are a few unique functions that
you may use in the basic operation. Since some applications call for numerous
players in the same close proximity, we have incorporated "Power Off" (only),
"Power On" (only) and "Eject" (only) buttons. With these buttons you can have
10 DVD players in 1 room and if you want to power them all off, simply press the
"Stand By" button (9) as many times as it takes for all the players to go into stand
by mode (red light will be illuminated (10)). With other DVD players, pressing the
power button multiple times will turn on some players and turn others off. We
incorporated the same functionality with "Power On"
tons.
Basic Operation Of Player - Power Off & Notes
If you wish to turn the power off to the player you can press the "Stand By"
button on the remote or the "Power" button
power to the player is off, the light on the front of the player will turn red (10). The
player is powered down and only the light remains on (uses almost no electric-
ity).
i g i t a l
(1)
(6) (auto start,
(8)
or on the remote
(13) front of the player. When the
Model V2200 industrial DVD player owners manual
(1)
(7)
(8) (6)
(11) (12)
and "Eject" but-
(9)
(2) (3)
(11)
(14)
(15)
(16)
(4)
(13) (10)
(9) (12)