Menu; Main Menu; Update The Receiver By Usb2.0 Interface; Copy The Update File To The Usb Drive From Pc - Alcor HD-1500 User Manual

7

MENU

7.1 MAIN MENU

Most function is available on main menu. Follow the operation help information on the
bottom of the menu to modify preference option. The password was required while you
trying to modify the settings. Default password is "00000000".
8

UPDATE THE RECEIVER BY USB2.0 INTERFACE

8.1 COPY THE UPDATE FILE TO THE USB DRIVE FROM PC

1. Please go to service website or contact our customer service to get the latest software for
updating the Receiver.
2. Plug the USB drive to the PC and backup the entire data of the USB drive. Right click
the USB drive and select Format item. Format the USB drive as FAT32 file system.
3. Copy the update file that name as "SMC7828.AP" to the root of the USB drive. Then
remove the USB drive from the PC.
Warning: The USB interface is for software upgrade of the Receiver only using a USB Flash
Drive with FAT32 file system format.
that with U3 PRO System.
Receiver.

8.2 UPDATE THE RECEIVER BY USB INTERFACE

1. Plug the USB drive that with the update file to the USB interface of the receiver.
2. Go to main menu and press "6666" to start upgrade process. While the upgrade progress showing
100% and update finish, remove the USB flash drive and power on the receiver again.
NOTE: Please do not remove the USB drive from the receiver and power off the receiver during
upgrading process. Otherwise the receiver may not work properly.
The USB interface could not support the USB Flash drive
Never connect a portable hard disk to the USB interface of the
18