ZyXEL Communications NWA5301-NJ User Manual page 94

Chapter 9 AP Profile
Note: You need to know the MAC address of each wireless client, AP, computer or router
that you want to allow to communicate with the NWA's wireless clients.
Figure 55 SSID > MAC Filter List > Add/Edit Layer-2 Isolation Profile
The following table describes the labels in this screen.
Table 45 SSID > MAC Filter List > Add/Edit Layer-2 Isolation Profile
LABEL
Profile Name
Add
Edit
Remove
#
MAC
Description
OK
Cancel
94
DESCRIPTION
Enter up to 31 alphanumeric characters for the profile name. This name is only visible in
the Web Configurator and is only for management purposes. Spaces and underscores are
allowed.
Click this to add a MAC address to the profile's list.
Click this to edit the selected MAC address in the profile's list.
Click this to remove the selected MAC address from the profile's list.
This field is a sequential value, and it is not associated with a specific user.
This field specifies a MAC address associated with this profile.
This field displays a description for the MAC address associated with this profile. You can
click the description to make it editable. Enter up to 60 characters, spaces and underscores
allowed.
Click OK to save your changes back to the NWA.
Click Cancel to exit this screen without saving your changes.
NWA5301-NJ User's Guide