ZyXEL Communications NWA5301-NJ User Manual page 56

Chapter 6 Network
Table 24 Configuration > Network > IP Setting (continued)
LABEL
DNS Server IP
Address
IPv6 Address
Assignment
Enable Stateless
Address Auto-
configuration
(SLAAC)
Link-Local
Address
IPv6 Address/
Prefix Length
Gateway
Metric
DHCPv6
DUID
Request Address
DHCPv6 Request
Options
DNS Server
NTP Server
Apply
Reset
56
DESCRIPTION
Enter the IP address of the DNS server.
Select this to enable IPv6 stateless auto-configuration on the NWA. The NWA will
generate an IPv6 address itself from a prefix obtained from an IPv6 router in the
network.
This displays the IPv6 link-local address and the network prefix that the NWA generates
itself for the LAN interface.
Enter the IPv6 address and the prefix length for the LAN interface if you want to use a
static IP address. This field is optional.
The prefix length indicates what the left-most part of the IP address is the same for all
computers in the network, that is, the network address.
Enter the IPv6 address of the default outgoing gateway using colon (:) hexadecimal
notation.
Enter the priority of the gateway (if any) on the LAN interface. The NWA decides which
gateway to use based on this priority. The lower the number, the higher the priority. If
two or more gateways have the same priority, the NWA uses the one that was
configured first.
Select this option to set the NWA to act as a DHCPv6 client.
This field displays the DHCP Unique IDentifier (DUID) of the NWA, which is unique and
used for identification purposes when the NWA is exchanging DHCPv6 messages with
others. See Appendix B on page 187
Select this option to determine what additional information to get from the DHCPv6
server.
Select this option to obtain the IP address of the DNS server.
Select this option to obtain the IP address of the NTP server.
Click Apply to save your changes back to the NWA.
Click Reset to return the screen to its last-saved settings.
for more information.
NWA5301-NJ User's Guide