Using The Computer; Power Cord; Signal Cable - LG W2061TQ User Manual

Connecting the Display

Using the Computer

1.
Make sure to turn off the computer and product. Connect the cable as below sketch map
form 1 to
A
Connect DVI-D Cable
B
Connect D-sub Cable (PC)
C Connect D-sub Cable (Mac)
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores
to maintain standard compliance for the product.

Power Cord

Wall-outlet type
2 .
For Apple Macintosh use, a separate plug adapter is needed to
change the 15 pin high density (3 row) D-sub VGA connector on the
supplied cable to a 15 pin 2 row connector.

Signal Cable

Varies according to model.
Mac adapter
A6 A6
DVI-D(This feature is not
available in all countries.)