Yamaha F50 Owner's Manual page 107

1
2
1. Filter cup
2. Water detection switch lead
6. Drain the water in the filter cup by soak-
ing it up with a rag.
7. Firmly screw the filter cup onto the filter
housing. NOTICE: Be careful not to
twist the water detection switch lead
when screwing the filter cup onto the
filter housing.
8. Connect the water detection switch cou-
pler securely until a click is heard.
1
1. Water detection switch coupler
9. Fasten the water detection switch lead
with the plastic tie.
ZMU07931
[ECM01970]
ZMU07932
Trouble Recovery
1
1. Plastic tie
10. Install the top cowling.
11. Start the engine and make sure that the
water separator-alert indicator remains
off. Have a Yamaha dealer inspect the
outboard motor after returning to port.
F70
1. Stop the engine.
2. Remove the top cowling.
3. Remove the cover.
4. Remove the holder.
ZMU07933
ZMU07095
101