Water Separator-Alert Indicator Blinks While Cruising - Yamaha F50 Owner's Manual

Trouble Recovery
EMU41461
Water separator-alert indicator blinks
while cruising
EWM01500
WARNING
Gasoline is highly flammable, and its va-
pors are flammable and explosive.
Do not perform this procedure on a hot

or running engine. Allow the engine to
cool.
There will be fuel in the fuel filter. Keep

away from sparks, cigarettes, flames or
other sources of ignition.
This procedure will allow some fuel to

spill. Catch fuel in a rag. Wipe up any
spilled fuel immediately.
The fuel filter must be reassembled

carefully with the O-ring, filter cup, and
hoses in place. Improper assembly or
replacement could result in a fuel leak,
which could result in a fire or explosion
hazard.
If the water separator-alert indicator on the
Command Link Multifunction Tachometer
blinks, perform the following procedure.
1. Water separator-alert indicator
F50, T50, F60, T60
1. Stop the engine.
2. Remove the top cowling.
3. Remove the plastic tie.
100
1
1. Plastic tie
4. Disconnect the water detection switch
coupler. NOTICE: Be careful not to get
any water on the water detection
switch coupler, otherwise a malfunc-
tion could occur.
1
1. Water detection switch coupler
5. Unscrew the filter cup from the filter
housing. NOTICE: Be careful not to
twist the water detection switch lead
when unscrewing the filter cup.
[ECM01960]
ZMU07929
[ECM01950]
ZMU07930