Audio - Yamaha HTR-2866 Owner's Manual

Audio

Problem
No sound.
The volume cannot be increased.
No sound is coming from a specific speaker.
No sound is coming from the subwoofer.
No sound from the playback device (connected to
the unit with HDMI).
No sound from the TV (when HDMI Control is
used).
Cause
Another input source is selected.
Signals that the unit cannot reproduce are being input.
The cable connecting the unit and playback device is defective.
The maximum volume is set.
A device connected to the output jacks of the unit is not turned on. Turn on all devices connected to the output jacks of the unit.
The playback source does not contain a signal for the channel.
The currently selected sound program/decoder does not use the
speaker.
Audio output of the speaker is disabled.
The volume of the speaker is set too low.
The speaker cable connecting the unit and the speaker is
defective.
The speaker is malfunctioning.
The playback source does not contain LFE or low-frequency
signals.
Subwoofer output is disabled.
The volume of the subwoofer is too low.
The subwoofer has been turned off by its auto-standby function.
The TV does not support HDCP (High-bandwidth Digital Content
Protection).
The unit is set not to output audio input through HDMI jacks from
the SPEAKERS terminals.
The number of devices connected to the HDMI OUT jack exceeds
the limit.
The TV is set to output audio from the TV speakers.
A TV that does not support ARC is connected to the unit only with
an HDMI cable.
(If the TV is connected to the unit with an audio cable)
The TV audio input setting does not match the actual connection.
(If you are trying to use ARC)
ARC is disabled on the unit or TV.
Remedy
Select an appropriate input source with the input selection keys.
Some digital audio formats cannot be played back on the unit. To check the audio
format of the input signal, use "Signal Info" in the "Option" menu (p.42).
If there is no problem with the connection, replace with another cable.
Use "Max Volume" in the "Setup" menu to adjust the maximum volume (p.51).
To check it, use "Signal Info" in the "Option" menu (p.42).
To check it, select "5ch Stereo" (p.31).
Use "Configuration" in the "Setup" menu to change the speaker settings (p.46).
Use "Level" in the "Setup" menu to adjust the speaker volume (p.47).
If there is no problem with the connection, replace with another speaker cable.
To check it, replace with another speaker. If the problem persists, the unit may be
malfunctioning.
To check it, set "Extra Bass" in the "Setup" menu to "On", in order to output the
front channel low-frequency components from the subwoofer (p.47).
Set "Subwoofer" in the "Setup" menu to "Use" (p.46).
Adjust the volume on the subwoofer.
Disable the auto-standby function of the subwoofer or adjust its sensitivity level.
Refer to the instruction manuals for the TV and check the TV's specifications.
In "Audio Output" in the "Setup" menu, set "Amp" to "On" (p.48).
Disconnect some of the HDMI devices.
Change the audio output setting on your TV so that the TV audio is output from the
speakers connected to the unit.
Use a digital optical cable to make an audio connection (p.20).
Use "TV Audio Input" in the "Setup" menu to select the correct audio input jack
(p.49).
Set "ARC" in the "Setup" menu to "On" (p.49). Also, enable ARC on the TV.
APPENDIX ➤ Troubleshooting
58
En