Download Print this page

Specifications - Linear Power 2602 Owner's Manual And Installation Manual

Bi-amp 120 watt amplifier

Advertisement

Main Amplifier: 30 Watts per channel minimum continuous average power into four
ohms. Both channels driven from 300Hz to 20KHz with no more
than 0.04% total harmonic distortion.
Subwoofer
60 watts minimum continuous average power output into two
Amplifier:
ohms, mono from 20Hz to 200Hz with no more than 0.04% total
harmonic distortion.
Inter-modulation
Distortion: 0.1%
Frequency
20Hz – 79 Hz Sub
Response:
Signal to Noise
95dB or greater (A-Weight)
Ratio:
Slew Rate: 7 volts per microsecond
Crossover Phase
+/- 2.8 degrees maximum
Shift:
Current Draw: 1 amp at idle. 17 amperes at maximum RMS test conditions.
Input Signal for
Maximum Power: 150 MV at maximum gain setting. 5 volts at minimum gain setting.
Dynamic
2dB
Headroom:
Damping Factor: 77 Sub 174 High Freq out
Dimensions: 2.75" x 8.0" x 9.875"
3 4 5 5 L A N E L L L A N E, P E A R L, M S 3 9 2 0 8 (6 0 1) 9 3 2 – 8 4 7 7

SPECIFICATIONS

2602
© 2008 Linear Power, Inc. - ALL RIGHTS RESERVED
LINEAR POWER™ is a trademark of Linear Power, Inc
©
79 Hz – 20KHz High Out
.
6

Advertisement

loading

This manual is also suitable for:

2652