Download Print this page

Specifications - Linear Power 2121 Owner's Manual And Installation Manual

Stereo bi-amplifier

Advertisement

Main Amplifier: 60 Watts per channel minimum continuous average power into four
ohms. Both channels driven from 300Hz to 20KHz with no more
than 0.10% total harmonic distortion.
Subwoofer
120 watts minimum continuous average power output into two
Amplifier:
ohms, mono from 20Hz to 200Hz with no more than 0.10% total
harmonic distortion.
Inter-modulation
Distortion: 0.1%
Frequency
-3dB from 12 to 150,000 Hertz
Response:
Signal to Noise
95dB or greater (A-Weight)
Ratio:
Slew Rate: 16 volts per microsecond
Crossover Phase
+/- 2.8 degrees maximum
Shift:
Current Draw: 1.2 amperes at idle. 24 amperes at maximum RMS test conditions.
Input Signal for
Maximum Power: 0.2 volts at maximum gain setting. 5 volts at minimum gain setting.
Dynamic
2dB
Headroom:
Damping Factor: 100 high freq./75 low freq.
Dimensions: 3"x9.5"x12"
3 4 5 5 L A N E L L L A N E, P E A R L, M S 3 9 2 0 8 (6 0 1) 9 3 2 – 8 4 7 7

SPECIFICATIONS

2121
© 2008 Linear Power, Inc. - ALL RIGHTS RESERVED
LINEAR POWER™ is a trademark of Linear Power, Inc
©
.
9

Advertisement

loading