Advertisement
1. Turn off all power going to Dock Fan.
2. Remove (8) screws on the OSHA guard with Phillips Head screwdriver. (see Step # 2)
3. Unfasten (4) blower panels screws from support angles. (see Step # 3)
4. Pull blower assembly out approximately 12 inches.
5. Reach inside housing and unplug receptacle from junction box.
General Maintenance Suggestions
Model DF-18, dock fan requires very little maintenance. However, since small problems left unchecked
could over time lead to loss of performance or early motor failure, we do recommend that the unit be
inspected periodically (once or twice a year).
The fan motor and propeller should be checked for dust and dirt accumulations. Dirt buildup can lead to
loss of performance and motor overheating. Cleaning can be accomplished by brushing of any dust that
may have accumulated.
Job Information
Job Name:__________________________________
Address:____________________________________
City:________________________________________
State:_______________
Phone: ______________
Contact Person: ______
5
Model DF-18 • Dock Fan
Service and Maintenance
Maintenance Documentation
Zip:_________________ _ State: _______________
_____________________ Phone:____________________________________________
_____________________ Work Done By:_____________________________________
Service Organization:______________________________
Address:__________________________________________
City:______________________________________________
Zip:_______________________
®
Advertisement
