Exploring Your Y-Cam; Y-Cam Bullet Hd 1080 At A Glance - Y-cam Bullet HD 1080 User Manual

2.0 EXPLORING YOUR Y-CAM

2.1 Y-cam Bullet HD 1080 at a glance

Applies to products: YCBLHD6
Please note: The status LED on the Bullet HD 1080 is on the Ethernet connector on the cable.
Please note: To reset your Y-cam Bullet HD 1080 back to factory default settings, you will need
to press the reset button. This is located inside the Y-cam Bullet HD 1080 and you will need to
remove the back part of the camera. The reset button is located next to the internal Ethernet
connector.
Page 8