Connecting The Nbn Connection Box To Your Own Equipment - NBN Fixed Wireless Connection User Manual

Connecting the NBN connection box
to your own equipment
The back of the NBN connection box has a row of ports like this;
Your broadband services will be delivered through the data (UNI-D) ports on the NBN
connection box. Your service provider(s) should advise you which data (UNI-D) ports have
been designated for your services, and how to connect any necessary equipment to the
correct port for each service.
All the cables required for the NBN connection box to operate will be supplied and
connected by your installer. Any extra cables required to connect your own equipment to
the NBN connection box will need to be supplied by you or your service provider.
The cable that connects the NBN connection box to the Outdoor Antenna is supplied by
NBN and will be fitted to the NBN connection box by the installer. The cable connection
is protected by a tamper-evident cover. Do not attempt to remove this connection or
connect to it.
If you have followed the instructions from your service provider and your
internet or other broadband connections are NOT working, or there are
any red or flashing lights on the NBN connection box, go straight to the
TROUBLESHOOTING guide on page 8.
Data (UNI-D) Ports
The four data (UNI-D) ports are to
connect data and in-band video
services, using Ethernet RJ-45 cables.
Power
Port for the
power cable.
5
© 2014 NBN Co Ltd.