Sony PMW-F55 Operating Instructions Manual page 71

Video
Menu items Sub items and setting values Contents
Monitor LUT
Category
LUT / Look Profile /
Setting for the
User 3D LUT
monitor LUT
LUT Select
P1: 709 (800%)
P2: HG8009G40
P3: HG8009G33
P4: S-Log2
P5: S-Log3
U1
U2
U3
U4
U5
U6
Look Profile Select
1: LC-709
2: LC-709typeA
3: SLog2-709
4: Cine+709
User 3D LUT Select
User 3D-1 / User 3D-2 /
User 3D-3 / User 3D-4
SDI (Main) & Internal Rec
MLUT On / MLUT Off
Selects the type of Look for Monitor LUT.
LUT: Outputs images using Preset LUT or User LUT.
Look Profile: Outputs images that are suited for the start point
of color grading or images that are close to print quality by
selecting the Look number.
User 3D LUT: Outputs images using User 3D LUT. (This
setting is available only when "Color Space" in "Base
Setting" of the System menu is set to "S-Gamut3.Cine/
SLog3" or "S-Gamut3/SLog3.")
Selects the type of LUT when "Category" in "Monitor LUT"
is set to "LUT."
709 (800%): Signals, for which the dynamic range is
expanded up to 800%, by using ITU-R709 as a standard.
HG8009G40: Signals, for which the dynamic range is 800%,
white limit is 109%, and use hyper gamma, for which
video output with 18% gray card is 40%.
HG8009G33: Signals, for which the dynamic range is 800%,
white limit is 109%, and use hyper gamma, for which
video output with 18% gray card is 33%.
S-Log2: Log signal with 1300% dynamic range, for which the
post production process should be performed, and
visibility for Video Monitor is considered. (This setting is
available only when "Color Space" in "Base Setting" of
the System menu is set to "S-Gamut/SLog2." The color
space is set to S-Gamut.)
S-Log3: Log signal with 1300% dynamic range, which is
close to Cineon Log curve, and the characteristics of film.
(This setting is available only when "Color Space" in
"Base Setting" of the System menu is set to
"S-Gamut3.Cine/SLog3" or "S-Gamut3/SLog3." The
color space is set to S-Gamut3.)
U1 to U6: Any LUT signal that is imported from an SD card.
Selects the type of Look Profile when "Category" in "Monitor
LUT" is set to "Look Profile."
Selects the 3D LUT signal that is imported from an SD Card.
Selects whether to apply Monitor LUT to the image that is
output from SDI (Main) and recorded on an SxS memory card.
(When "Main Operation" is set to "RGB," and "Rec Format"
is set to "XAVC 4096 × 2160P" or "XAVC 3840 × 2160P,"
this setting is locked to "MLUT Off."*)
* This setting is locked to "MLUT Off" for 4K/QFHD output,
and "MLUT On" for 2K/HD output and Viewfinder, when
the output setting is set to 4K/QFHD.
Setup Menu List 71