Sony PMW-F55 Operating Instructions Manual page 63

Camera
Menu items Sub items and setting values Contents
Color Bars
Setting
On / Off
Setting the Color
Bars
Type
ARIB / SMPTE / 75% / 100%
Noise Setting
On / Off
Suppression
Setting the noise
suppression
Level
Low / Mid / High
Flicker Reduce Mode
Auto / On / Off
Setting Flicker
Compensation
Frequency
50 Hz / 60 Hz
Image Setting
Normal / V Inv
Inversion
Setting the image
inversion function
Lens Interface
Setting
Type C / Type A / Type C+12P /
Setting the lens
Type A+12P / Off
interface
Zoom Limit
Off / Zoom Range 1 / Zoom
Range 2
Turns the color bars on/off.
Selects the type of color bar.
Turns the noise suppression function on/off.
(This setting is available only when "Shooting Mode" in
"Base Setting" of the System menu is set to "Custom.")
Sets the noise suppression level.
Set the operation of the Flicker-Reduction function.
Set to the power supply frequency of the light source causing
flicker.
Sets the image inversion.
Selects the lens interface according to the connected lens
type.
When using an optional LA-FZB1/FZB2 mount adapter,
select "Type C."
When using the lens mount adapter with Lens 12 pin (service
parts), select "Type C+12P" or "Type A+12P."
Note
If changing this setting while the lens attached to the
camcorder, turn the camcorder off, then turn it on.
Sets the limit for the zoom operation range of the power
zoom.
Setup Menu List 63