Sony PMW-F55 Operating Instructions Manual page 36

Tablet
Main screen
• Wi-Fi connecting status (Connected/Disconnected)
• Status indication:
operating status, time data, audio level meter, clip
name, recording format, media status/remaining space,
battery remaining charge/DC IN voltage
• Assignable button indication:
Assignable buttons 1 to 4
• Recording settings indication:
S&Q FPS, Shutter, Color Temp., Sensitivity/Gain/
Exposure Index, Gamma, MLUT, Color Bars, Auto
Black, Auto White
Playback screen
• Wi-Fi connecting status (Connected/Disconnected)
• Status indication
• Assignable button indication
• Playback operation button:
F Rev, Play/Pause, F Fwd, Prev, Stop, Next
Cursor screen
36 Using a USB Wireless LAN Module
• Wi-Fi connecting status (Connected/Disconnected)
• Status indication
• Assignable button indication
• Cursor operation button, menu/status indication:
Up, Left, Set, Right, Down, Cancel/Back, Menu,
Status
To display the Wi-Fi remote commander
The display size of the Wi-Fi remote commander
changes according to the device screen size
automatically.
1
Make a Wi-Fi connection between the
device and camcorder (page 34).
2
Launch the browser and input http://
<camcorder's IP address> ("System
menu" > "Wi-Fi" > "IP Address")/
rm.html in the address bar.
Example: When the IP address is 10.0.0.1,
input http://10.0.0.1/ in the address bar.
3
Input the user name and password
("System menu" > "Basic
Authentication" > "User Name" or
"Password") on the browser.
When completing the connection, the display
of the Wi-Fi remote commander appears on
the device.
Operate the Wi-Fi remote commander by
following the display.
The REC button becomes unavailable when
the Lock switch is dragged to the right.
Notes
• Depending on the device, the Wi-Fi remote
commander may not appear properly on the device's
screen even though you input http://<camcorder's IP
address>/rm.html in the address bar. In this case, input
"rms.html" for a smartphone or "rmt.html" for a tablet
instead of "rm.html" at the end of the address to
display the Wi-Fi remote commander properly.
• The Wi-Fi remote commander on the device's screen
may no longer match the actual status of the camcorder
in the following cases. When this happens, refresh the
browser on the device.
—when the camcorder is restarted while the Wi-Fi
connection is established
—when the camcorder is controlled directly while
the Wi-Fi connection is established
—when the device is reconnected
—when you operate forward/backward on the
device's browser.
• If the Wi-Fi signal is poor, the Wi-Fi remote
commander may not work properly.