Connecting External Equipment
Before connecting any external equipment, remove the mains plug from the
(*) Number of these inputs may change according to the model of your TV.
Before running first time installation, any connected devices need to be set to standby mode.
(High-Definition Multimedia Interface) is for using with a DVD decoder or other equipment with
digital audio and video output. It is designed for best performance with 1080i and 1080p high-definition video
signals but will also accept and display VGA, 480i, 480p, 576i, 576p and 720p signals. PC format signals will
also be displayed.
NOTE: Although this TV is able to connect to HDMI equipment, it is possible that some equipment may not
When connecting a device via the Side AV input, you must use the supplied connection cable to enable
When connecting a device via YPbPr input, you must use the supplied connection cable to enable
If the TV automatically switches over to monitor external equipment, return to normal TV by pressing the
desired programme position button. To recall external equipment, press SOURCE button repeatedly to switch
English - 8 -