Q & A Section - Toshiba 48L145 DN Online Manual

Q & A Section
Question
Why is there no sound or picture?
Why is there a picture but no sound?
Why does the sound
Sound
one speaker when stereo sound is
selected?
Why is the soundtrack in English
when a different audio language has
been selected?
What can cause a poor picture?
Why isn't the video / DVD being
played shown
Picture
Why is the Blu-ray / DVD player in
black and white?
Why are there horizontal stripes and
or blurred images on the screen
when in PC mode?
Why doesn't the remote control
work?
Why doesn't the Media browser
feature operate?
Why digital subtitles
on screen when they are
Why is the digital channel locked?
Why are some encrypted digital
channels unavailable?
General
Why does the active standby LED
sometimes take longer to go out?
Why don't the controls of the TV
work?
What is DVB-T?
What is DVB-C?
How are radio channels selected?
What can be done if the pin number
is forgotten?
Answer
Check
Check the mains plug and all mains connections
Check
not been selected
come only from
Check
side
The programme is currently being broadcast with an English
soundtrack only.
Interference or a weak signal. Try a different TV station
Make sure the Blu-ray of DVD player is connected to the TV as
illustrated in the beginning chapters, then select the correct input
on screen?
by pressing SOURCE.
Check
The phase may need adjusting. Select PC settings and highlight
Phase and adjust until the picture is clear.
Check
Make sure the USB stick / HDD is connected correctly. Incorrect
operation
Check your network setup if using media server.
are not shown
Subtitles are not currently being transmitted by the broadcaster
selected?
Parental control is activated. Check parental settings
Your subscription needs upgrading. Contact your service provider.
When in active standby, the TV's active standby will automatically
search all available channels for updates, provided automatic
update is enabled. The required time to do this may vary. Led
blinks red and green in this mode.
Check
Digital Video Broadcast via an aerial / antenna.
Digital Video Broadcast via a cable system.
You can select them via Channel list
You can reset the TV and perform the first time installation again.
Ensure that no one else is aware of this procedure by
storing the Owner's Manual.
English - 43 -
if the TV is not in standby mode
if the volume has not been turned
the balance in the SOUND menu
or not
if the correct input has been chosen
if the batteries are exhausted
may occur from a USB Hub connection.
if CHILD LOCK is selected or not
off or sound mute has
if it has been set to one
or not.
or inserted incorrectly
securely